The Difference Between Lug and Flanged Butterfly Valves

The clamp-style valve is more affordable, typically costing about two-thirds the price of a flanged valve. When selecting imported valves, opt for the clamp-style whenever possible—it’s not only cheaper but also lighter in weight. However, clamp-style valves feature longer bolt lengths, which demand higher precision during installation. If the flanges on either side become misaligned, the bolts will experience significant shear forces, increasing the risk of leakage. Additionally, in high-temperature applications, the extended bolts may expand under heat, potentially leading to leaks. Therefore, clamp-style valves are generally not recommended for large-diameter pipelines operating at elevated temperatures. Moreover, clamp-style butterfly valves are usually unsuitable for use at the pipeline’s end or in scenarios where downstream disassembly is required. This is because, once the downstream flange is removed, the clamp-style valve itself could fall off. To avoid this issue, an additional short section must be installed specifically for easy removal—a design challenge that doesn’t arise with flanged butterfly valves, though the latter come at a higher cost. In contrast, clamp-style butterfly valves lack flanges at both ends, featuring instead just a few导向螺栓孔. The valve connects to end flanges using a set of bolts and nuts. While this design makes disassembly simpler and reduces overall costs, it also means that if one sealing surface fails, both seals must be dismantled simultaneously. On the other hand, flanged butterfly valves have flanges at each end, allowing them to connect directly to pipe flanges. This design offers more reliable sealing performance, albeit at a significantly higher price point. Ultimately, choosing between the two depends on specific application needs and budget considerations.

2019-06-25

How does a stainless steel butterfly valve work?

  Stainless steel butterfly valves primarily consist of a valve body, stem, disc, and sealing ring. The valve body is cylindrical with a short axial length, housing the disc inside. These valves operate by rotating the disc—shaped like a circular plate—back and forth approximately 90° to open, close, or regulate the flow of the medium. When selecting a butterfly valve for precise flow control, it’s crucial to choose the right size and type to prevent inaccuracies in flow regulation. Stainless steel butterfly valves are suitable for controlling the flow of various fluids, including air, water, steam, corrosive media, slurry, oils, liquid metals, and even radioactive substances. In practice, these valves are categorized based on their operating pressure and temperature, though these conditions are somewhat limited by the inherent properties of stainless steel itself.

2019-06-25

Industrial Features of Stainless Steel Butterfly Valves

Stainless steel products are already widely used in everyday life, thanks to the unique properties of stainless steel that have enabled this material to be rapidly and extensively integrated into various applications. In fact, however, stainless steel has a longer history of industrial use. Today, Tianjin Butterfly Valve Manufacturer is here to share the key features of stainless steel butterfly valves in industrial production. 1. Organic substances like fruit juices, vegetable residues, noodle soup, or even bodily fluids such as mucus can adhere to the surface of stainless steel butterfly valves. In the presence of water and oxygen, these organic materials form organic acids, which, over time, may corrode the metal surface. 2. Dust particles containing other metallic elements or foreign metal fragments often accumulate on the valve’s surface. When exposed to humid air, condensation forms between these contaminants and the stainless steel, creating a micro-battery effect that triggers an electrochemical reaction. This process damages the protective oxide layer, leading to what’s known as electrochemical corrosion. 3. Acidic, alkaline, or saline substances—such as alkali solutions from wall renovations or lime-water splashes—can also stick to the valve surface, causing localized corrosion. 4. In polluted atmospheric conditions—especially those rich in sulfides, carbon oxides, or nitrogen oxides—condensation can lead to the formation of acidic or corrosive compounds like sulfuric acid, nitric acid, or acetic acid droplets. These chemicals can initiate chemical corrosion, further compromising the protective film on the stainless steel surface and ultimately leading to rust formation. Any of these scenarios can weaken the protective oxide layer on stainless steel, ultimately resulting in corrosion.

2019-06-25

Features of Stainless Steel Butterfly Valves and Lug-Type Butterfly Valves

  Butterfly valves are widely used in industrial pipeline control systems due to their ease of use. However, given the wide variety of butterfly valve types available, selecting the right one is crucial. Today, let’s explore the features of stainless steel butterfly valves and lug-type butterfly valves, as introduced by our editorial team from a butterfly valve manufacturer in Tianjin.   A stainless steel butterfly valve primarily consists of a valve body, stem, disc, and sealing ring. The valve body is cylindrical with a short axial length, housing a disc-shaped butterfly plate inside. Operation is achieved by rotating the disc—similar to a circular plate—through approximately 90° to open, close, or regulate the flow of the medium. When using a butterfly valve for flow control, it’s essential to choose the appropriate size and type carefully, ensuring precise regulation and preventing inaccuracies. Stainless steel butterfly valves can effectively manage the flow of various fluids, including air, water, steam, corrosive media, slurry, oils, molten metals, and even radioactive substances.   On the other hand, the disc of a lug-type butterfly valve is mounted perpendicular to the pipe’s diameter, primarily serving as a shut-off and throttling device within the pipeline. This type of valve features a disc-shaped butterfly plate that rotates around its own axis inside the valve body, enabling smooth opening, closing, or fine-tuning of the flow. Equipped with a worm gear reducer, the lug-type butterfly valve not only provides self-locking functionality, allowing the disc to remain securely fixed at any position, but also significantly enhances the valve’s operational performance. Beyond its compact design, lightweight construction, and minimal material usage, this valve boasts advantages such as small installation dimensions, reduced actuation torque, and effortless, rapid operation. Additionally, it delivers excellent flow control capabilities along with reliable sealing performance when fully closed. Finally, lug-type butterfly valves are installed between two pipe flanges using double-head bolts.

2019-06-25

What are the structural features of a ventilation butterfly valve?

  Valves vary in effectiveness depending on their design. Today, let Tianjin Butterfly Valve Manufacturer’s editor guide you through the structural features of ventilation butterfly valves.   A ventilation butterfly valve is crafted by welding steel plates together, giving it advantages such as compact size, lightweight construction, and ease of installation. Additionally, it boasts low flow resistance and high throughput, while remaining unaffected by thermal expansion at high temperatures. Its minimal operating torque ensures smooth, flexible opening and closing, making it incredibly convenient to use—a favorite among industry professionals.   One of the key structural features of this valve is its design: it combines a centerline butterfly disc with a short, welded steel plate. This innovative construction eliminates internal components like connecting rods and bolts, virtually eliminating the risk of component-related issues during operation. As a result, the failure rate remains exceptionally low, ensuring reliable performance and making it a dependable valve solution.   Moreover, the valve employs a metal-to-metal sealing system, which, though not as tight-sealing as elastic designs, offers superior durability and longevity. It also excels in withstanding high temperatures, making it ideal for industries such as construction materials, power generation, and metallurgy. This butterfly valve can be seamlessly integrated into pipelines transporting media at temperatures up to 300°C, enabling both connection/disconnection and precise flow regulation.   Additionally, these valves can be custom-made to meet specific customer requirements, offering unparalleled flexibility and user-friendliness. Thanks to the generous clearance between the butterfly disc and the valve body, there’s ample room for thermal expansion and contraction—effectively preventing the disc from seizing up under temperature fluctuations. Ventilation butterfly valves come in a variety of actuation options, including manual, electric, and pneumatic drives, providing users with plenty of choices to suit their needs. And because of the high-quality materials used, these valves are not only resistant to extreme temperatures but also operate smoothly without any friction during switching, further enhancing their long service life.

2019-06-25

What is the manufacturing process for valve gearboxes?

How is a valve gearbox manufactured? Valve gearboxes typically use reduction gearing to amplify torque. For single-stage (two-speed) gear transmissions, the transmission ratio shouldn’t be too high, as this could lead to an excessively large size. If a higher transmission ratio—meaning greater torque amplification—is required, multi-stage gearing should be employed, resulting in a multi-turn valve gearbox.

2021-11-05

Let's explore some key knowledge about valve gearboxes.

Not many people may be familiar with valve gearboxes, so let’s dive into some key insights about them together. The valve gearbox falls within the realm of industrial valve technology and specifically refers to an industrial valve switching gearbox. It consists of a housing, gears, a screw rod, and the gearbox unit itself. The gear is fixedly installed in the middle of the housing, with its top surface meshing directly with the screw rod. The right end of the screw rod is securely attached to the gearbox, while a clamping plate is fastened to the top of the housing using screws. Finally, a sealing plate is firmly mounted around the top circumference of the housing.

2021-11-08

What are the advantages of manual valve actuators?

The introduction of manual valve actuators has undoubtedly provided businesses with a fast and high-quality solution. That’s why many manufacturers are eager to purchase these devices to enhance their factory equipment. Of course, before using this product, you’re likely to have several questions on your mind. First and foremost, it’s important to understand exactly what its key advantages are. Let’s dive into a brief overview right now!

2021-11-17

What factors should you consider when choosing a manufacturer of manual valve actuators?

The use of manual valve devices is now incredibly widespread, playing a crucial role in everyday consumer life. To ensure you purchase a high-quality product, it’s essential to find a reputable manufacturer. Below, we’ll highlight the key considerations when searching for a reliable manufacturer—so if you’re interested, let’s dive in together!

2021-11-22

A basic introduction to gearboxes? Let's take a look together!

There are quite a few key points we need to understand before using a gearbox—points that many users may still be unclear about. So, let’s dive into some essential information about gearboxes right now. If you’re curious, grab your chance to learn more—it might just be exactly what you need to know!

2021-11-23